Fenophoto - Automatic photo enhancer

Fenophoto, developed by Alessandro Lazzara & Beniamino Ferrari, automatically and with just one-click allows you to enhance and remove most common defects of any digital photo.

Fenophoto works with powerful algorithms used in video restoration, many of which use sophisticated frame reconstruction techniques. It provides a set of preconfigured filters, so anyone can easily enhance photos with little to no knowledge of photography.

You can choose between 7 profiles:

-Default: is suggested profile that applies most common correction filters, balanced for most common condition

-Nature: Because sometimes “Default” profile “fails” expecially on photo with nature subject (result can be blurred), in those cases you can use this profile

-Denoise: is suggested if you want just remove digital noise (no other filters are applied)

-Highlight: is suggested in case of highlight, fire, sun

-Person: is suggested in case of photos with people, especially with close-ups. It uses specific filters, like red eyes removal, usefull for faces

-Color: it is similar to default but suggested if you want a result with more vivid colors

-Change color: the profile mainly applies the gamma correction algorithm for a different color management. Ideal for example for photos tending to red that must be cooled

-Custom: here you can enable and configure your favorite filters. By default, this profile produces more brightness and sharpening, so it is also recommended for those who want a stronger result than the "Default" profile

Each profile is composed by a set of preconfigured filters; it is suggested to don’t modify Default/Nature/Denoise/Highlight/Person/Color/Change color profiles, but use “Custom” profile to configure your favorite filters:

-Auto Levels: it applies Automatic Levels; you can increase strenght of the filter using values from 0.5 to 3.0. You can choose between 4 different algorithms

-Adjust colors(gamma): it applies a filter that modifies color management; in most cases this filter generates right color perception, in others it fails (which is why it is disabled by default)

-Denoise: in case of grain photos, this filter automatically applies a complex and slow image noise reduction

-Remove red eyes: automatically detects red eyes and corrects them; you can set a value range from 1.5 to 3.0: with lower value an higher filter action will be applied, but it may generate artifacts; so, increase the value by 0.1 steps if red eyes are removed but artifacts generated; instead, reduce the value by 0.1 steps if the filter failed to correct the red eyes

-Reduce high light: it is possible to reduce areas with high light, such as flash; you can choose between Low/Medium/High profiles to apply your favorite strength; use this filter only in cases of need; could cause artifacts(which is why it is disabled by default)

-HDR: it applies a special filter that can equalize the shadow areas respect to the rest of the photo; you can increase shadows bright choosing between Low/Medium/High profiles

-Sharp: the filter applies an increase in the sharpness of the photo; you can choose your preferred sharpness level choosing between Low/Medium/High profiles. If is it enabled, it is suggested use it together remove noise filter

-Adjustments: It is also possible manually adjust the hue, saturation, brightness and contrast

Fenophoto allows you to save and share your enhanced shots with social media!

Hashtag #fenophotoapp #fenophotofilter

Fenophoto requires a fast internet connection.

As said before, because Fenophoto uses complex algorithms to automatically enhance your images, it need to upload photos to our servers and than processed photos will be returned to your phone.

But nobody can view your images, that will be automatically deleted in 1 hour!

However, we are not responsable for the content that you upload.

Fenophoto由Alessandro Lazzara和Beniamino Ferrari开发，只需单击一下即可自动增强和消除任何数码照片的常见缺陷。

Fenophoto与视频恢复中使用的强大算法配合使用，其中许多算法使用复杂的帧重建技术。它提供了一组预配置的过滤器，因此任何人都可以轻松地增强照片，几乎不知道摄影。

您可以选择7个配置文件：

-Default：建议应用最常见的校正滤波器的配置文件，适用于大多数常见情况

-Nature：因为有时“默认”配置文件“失败”特别是在带有自然主题的照片上（结果可能模糊），在这些情况下您可以使用此配置文件

-Denoise：建议您只想删除数字噪音（不应用其他过滤器）

- 高亮：建议高光，防火，防晒

-Person：建议与人合影，特别是特写镜头。它使用特定的过滤器，如红眼消除，对脸部有用

-Color：它类似于默认值，但建议如果你想要一个颜色更鲜艳的结果

- 变换颜色：配置文件主要将伽马校正算法应用于不同的颜色管理。非常适用于必须冷却的趋于红色的照片

- 自定义：在这里您可以启用和配置您喜欢的过滤器。默认情况下，此配置文件会产生更多亮度和锐化，因此建议那些想要比“默认”配置文件更强大的结果的人

每个配置文件由一组预先配置的过滤器组成;建议不要修改默认/自然/降噪/突出显示/人物/颜色/更改颜色配置文件，但使用“自定义”配置文件配置您喜欢的过滤器：

-Auto Levels：它应用自动级别;您可以使用0.5到3.0的值来增加过滤器的强度。您可以选择4种不同的算法

- 调整颜色（gamma）：它应用一个修改颜色管理的过滤器;在大多数情况下，此过滤器会生成正确的颜色感知，而在其他情况下，它会失败（这是默认情况下禁用的原因

-Denoise：对于纹理照片，此滤镜会自动应用复杂且慢速的图像降噪

- 去除红眼：自动检测红眼并纠正它们;您可以设置1.5到3.0之间的值：使用较低的值将应用更高的过滤器操作，但它可能会生成工件;因此，如果移除红眼但产生伪影，则将值增加0.1步;相反，如果滤镜无法校正红眼，则将值减小0.1步

- 减少高光：可以减少高光区域，如闪光灯;您可以选择低/中/高配置文件来应用您最喜欢的力量;仅在需要时使用此过滤器;可能会导致工件（这是默认情况下禁用的原因）

-HDR：它应用一个特殊的滤镜，可以相对于照片的其余部分均衡阴影区域;您可以在低/中/高配置文件之间选择增加阴影

-Sharp：滤镜应用增加照片的清晰度;您可以选择在低/中/高配置文件之间选择的首选锐度级别。如果启用，建议一起使用它去除噪声滤波器

- 调整：也可以手动调整色调，饱和度，亮度和对比度

Fenophoto允许您使用社交媒体保存和分享增强的镜头！

标签＃fenophotoapp #fenophotofilter

Fenophoto需要快速的互联网连接。

如前所述，由于Fenophoto使用复杂的算法来自动增强您的图像，因此需要将照片上传到我们的服务器，而处理后的照片将会返回到您的手机。

但没有人可以查看您的图像，这将在1小时内自动删除！

但是，我们对您上传的内容不承担任何责任。